Alloy
-
Shaped, Flat, Square, Round, Fine, Plated and Bare Wire ASTM A167, AMS 5523
Alloy 310S is an austenitic chromium nickel stainless steel that posses good oxidation resistance and strength at high temperatures in continuous service up to 2000ºF (provided reducing sulfur gasses are not present). It is also used for intermittent service at temperatures up to 1900°F because it resists rescaling and has a low coefficient of expansion. This factor reduces the tendency of the steel to warp in heat service. Alloy 310S is similar to alloy 310 except for lower carbon content to minimize carbide precipitation during welding.
-
ALLOY 625 MATERIAL DATA SHEETS
Alloy 625 is a nonmagnetic , corrosion – and oxidation-resistant, nickel-based alloy. Its outstanding strength and toughness in the temperature range cryogenic to 2000°F (1093°C) are derived primarily from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix. The alloy has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. Some typical applications for alloy 625 have included heat shields, furnace hardware, gas turbine engine ducting, combustion liners and spray bars, chemical plant hardware, and special seawater applications.
-
ALLOY 718 MATERIAL DATA SHEETS
Inconel Alloy 718 A precipitation-hardenable nickel-chromium alloy also containing significant amounts of iron, niobium, and molybdenum along with lesser amounts of aluminum and titanium. It combines corrosion resistance and high strength with outstanding weldability including resistance to postweld cracking. The alloy has excellent creep-rupture strength at temperatures to 1300°F (700°C). Used in gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling. INCONEL alloy 718SPF™ is a special version of INCONEL alloy 718, designed for superplastic forming.
UNS: N07718
W.Nr.: 2.4668
-
Alloy
High Temperature Alloy Chemical composition Grade C Si Mn S P Cr Ni Fe Al Ti Cu Mo Nb other no greater than Inconel600 0.15 0.5 1 0.015 0.03 14～17 base 6～10 - - ≤0.5 - - - Inconel601 0.1 0.5 1 0.015 0.03 21～25 base 10～15 1～1.7 - ≤1 - - - Inconel625 0.1 0.5 0.5 0.015 0.015 20～23 base ≤5 ≤0.4 ≤0.4 - 8～10 3.15～4.15 Co≤1 Inconel725 0.03 0.2 0.35 0... -
ALLOY 600 MATERIAL DATA SHEETS
INCONEL 600
Inconel Alloy 600 A nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress-corrosion cracking, corrosion by high-purity water, and caustic corrosion. Used for furnace components, in chemical and food processing, in nuclear engineering, and for sparking electrodes.
UNS: N06600
W.Nr.: 2.4816
-
ALLOY 825 MATERIAL DATA SHEETS
Sandmeyer Steel Company stocks Alloy 825 nickel alloy plate in thicknesses from .1875″ (4.8mm) through 2.00″ (50.8mm) for corrosion resistant applications in the air pollution control, chemical and petrochemical, food processing, nuclear, offshore oil and gas production, ore processing, petroleum refining, steel pickling and waste disposal industries.
